Post edited 5:57 am – January 18, 2009 by pukka
Post edited 11:13 pm – February 6, 2009 by pukka
Post edited 5:39 am – February 12, 2009 by pukka
Post edited 3:20 pm – May 6, 2009 by pukka
Post edited 3:21 pm – May 6, 2009 by pukka
Post edited 3:33 pm – May 6, 2009 by pukka
Post edited 3:41 pm – May 6, 2009 by pukka
Post edited 4:20 pm – May 15, 2009 by pukka
Garmin Mobile XT with North America 2009 NT Maps
***NEW***Garmin Mobile 5.00.20 (Download here – Follow step 19 for install instructions) ***NEW***
Garmin Mobile XT is deisgned for people who would rather install GPS software to the memory card and not have to pay there cellular’s monthly gps rate
Now before I put the install guide up, I would like to thank "Restrected" for his hard work in making these files work
First off you will need to install Modaco’s GPS*** hacks located here Modaco GPS Hack (click here) After succesfully installing the Modaco GPS hack do not change any gps settings, leave them the way they are.***NEW(YOU WILL NEED THIS FOR BOTH WM 6.1 AND WM6.0)
Now you can choose between two methods for downloading, you can pick torrent(slower speed in most cases), or you can download them from a Rapidshare server. Both are the exact same files and it is completly up to you.
Now your going to have to install Garmin Mobile xt from this Torrent (click here). Or if you prefer to just download the files without using torrents click the button bellow.(downloading without torrent is usually faster)
Now if you not sure how to install torrents you must first download Azureus from here The torrent listed above has the complete set up to finish everything, it has all the software maps and so on.. Once this torrent is installed please Follow the instructions below(rapidshare link is the exact same)
BEFORE INSTALLING STEP 7 DID not work for me, I found a workaround, once garmin XT is installed on your device go to its settings and click the "about" button, there should be a 9 or 10 digit CARD ID, this is your UNIT ID DO NOT SKIP A SINGLE SENTENCE!
This is Garmin Mobile XT with North America 2009 NT Maps Complete with Everything you need to be up and runing with a smart phone or pda. This is the latest versions up to date. March 2008. You do not have to have a previous version of anything, Garmin or Mapsource to complete this installation and make it work, although it is named 2009 Update. It has been reported that sometimes you do not have to do step 12 and 13 in this tutorial, but i recommend you do so no problems arise.
All the files you need are here gathered by Restrected. Tested by restrected and pukka on the
- blackjack 2(i617)/
- samsung jack(i616).
- Nokia N95 8gb
- Nokia e71-2 nam
- Instructions By Restrected. Read carefully!
1. Install the pc software "Mapsource" into your computer by going to: "PC Mapsource Installation Files" and runing the file "CNNANT2009Update_ENU.exe".
- a.if you want it to be in a different language, just choose the last three letters that match the language you want it in.
- c.Accept everything it tells you.
- d.Select the destination folder (this is where the program and maps are going to be copied to. The default is "c:Garmin". I recomend to leave it that way.
- e.When you are done with the installation you will have a new icon on the desktop, "MapInstall". We dont need this right now, but we will get back to it.
2. Open the installation folder, the folder where you installed the program 1 minute ago, and open the folder "MapSource" within that. Create a shortcut of the file "MapSource.exe" in your desktop.
3. Close everything you have open accept for this "Instructions By Restrected.txt" file and the folder this file is found in. Open the folder "PC Mapsource Crack" and run the file "all.bat".
- a.In most cases it will only show "all" as the file name with some explanation below it.
- b.Let this program "all.bat" finish its work, is going to take a while (LET IT FINISH!).
- c.When its done, click "Enter". Not any key will make it exit.
- d.This program makes the images of the maps in your computer usable with any garmin device,and it unlocks them for use/view in the pc, also it makes possible for us to transfer them to the device of our choice.
4. Connect your mobile device to the computer and make sure that the appropriate software for synchronizing is running and recognizes it. You can also just plug the memory card into a card reader in your computer and that will do fine.
5. Open the folder named "Mobile Device Installation Files" and run the file "GarminMobileXTFullImage_4xxxx".
- a.Follow all the on screen instructions, and select the memory card as your destination for installation.
- b.Click all the next’s and dones until the program goes away.
- c.If you used a card reader in your pc, now remove the card and plug it in the mobile device. Automatically it should ask you if you want to install Garmin on your device and you should say "YES".
- d.If you installed it directly into the memory card through the mobile device, it will ask you if you want to install Garmin as well, click "YES".
6. Once it is done installing it in the mobile device, run it, skip everything it asks you, or click agree when necesery until you are at the main page.
- a.At the main page you will see 2 big buttons, one says "Where To" the other one sais "View Map".
- b.Once you are at that page, just let it be and connect the mobile device to the computer and make sure that the synchronizing software is running and recognizes the mobile device.
7. Earlier we created a shortcut for the file "MapSource.exe" to the desktop. Run that program, and once it opens, click on "Utilities" in the menu bar and click on "Get Unit ID…". I have found a workaround if the above doeesnt work follow these steps below in bold
once garmin XT is installed on your device go to its settings and click the "about" button, there should be a 9 or 10 digit CARD ID, this is your UNIT ID
- a.Write this down, it is your Unit ID, And it does not change unless you change the memory card. We are going to need this number. VERY IMPORTANT!
8. Open the folder "Mobile Device Maps And GPS Crack" and right click on the file "sw.unl" and select open. Select "choose a program from a list", and select Notepad as the program you want to open the file with. a.LEAVE This FILE OPEN!
9. Run the program Keygen.exe in the same folder.
10. Enter the Unit ID that you got earlier into the top box. Click on generate, and copy the code it gives you to the file "sw.unl" replacing the previews code and save it as it is, where it is.
- a.Just click on file on notepad, and save, that will save it as it was.
- b.DO NOT CLOSE THE KEYGEN! Leave it as it is with the codes as they are. c.You can close the "sw.unl" file (the notepad, after saving it).
11. In the folder "Mobile Device Maps And GPS Crack" again, right click on the file "gmapsupp.unl" and select open. Select "choose a program from a list", and select Notepad as the program you want to open the file with. a.LEAVE THis FILE OPEN!
12. On the Keygen program, in the bottom half, where it sais "Select Map Product", select "custom mapset" and enter the number "325″. Click on generate, and copy the code it gives you to the file "gmapsupp.unl" replacing the previews code and save it as it is, where it is.
- a.Just click on file on notepad, and save, that will save it as it was.
- b.You can close the "sw.unl" file (the notepad, after saving it).
13. Copy the 2 files, "gmapsupp.unl" and "sw.unl", that now should contain codes generated from the keygen, and paste them in the folder "Garmin" on your MicroSD storage card.
- a.You can use the explorer to get there while the mobile device is conected to the pc, or you can just plug the card into the pc’s card reader and get there that way.
14. Make sure the card is back in the device, and if it asks you again to install or not, just ignore it and click "NO".
15. Restart the mobile device (i say that cause most people dont know how to really shut down a program, so this ensures that Garmin did restart).
16. Run Garmin on your mobile device, and when you are at the main page, there should be a small icon in the left upper corner. Either bars, or a scroll like icon. If you have bars, you are good. If you have a scroll like icon, click on it somehow, click on menu, click on disable, make sure you select the apropriate gps reciever, click done.
- a.Wait up to 3 minutes until there are bars (like a phones signal bars) where the scroll used to be.
- b.Make sure that the internal gps is turned on (should already be on)
- c.Make sure that you select the apropriate interface for the gps, for this hack it should be set as a Com Port (this is done automatically you shouldnt have to worry about these settings )
17. Run "MapInstall" that should be in your desktop at this time, and follow the onscreen instructions to send the maps you want to your device.
- a.You can also plug the card in the pc’s card reader for faster transfers.
- b.This takes a while cause it has to create indexes and all that, so be patient.
- c.When your done with all this, you have a working gps navigation system in your mobile device.
18. If you don’t know how to send maps to the device, or you need help plotting a route, or you don’t know how to navigate and turn on and off sound and choose language in the navigation, or anything like this
***NEW (completely optional) Plus New 2010 Detailed North American Maps
19. Download the new Garmin Mobile XT software(must have completed all steps above)—-download from here, hook up phone to computer, run new Garmin Update, follow on screen instructions, once finished restart phone
you may have to regenerate new keys.
20.****NEW For anyone who would like to download the New 2010 North American Detailed Maps check out this thread ****
For anyone who would like to help keep these links live please donate by clicking here(DONATE)
, READ THE MANUALS ONLINE! Enjoy By Restrected posted by pukka!
Login 
Register 
Search 
Add a New Topic
Reply to Post
39
Quote and Reply 
Print this Post 
Topic RSS 
