| User | Post |
|
7:11 pm
August 27, 2008
|
pukka
Moderator
| | | |
| posts 1275 |
|
|
yeah im sure if you have the hack installing and it doesnt show the bluetooth screen then your GPS should start working….Yesturday when I used my GPS to get home from the beach it took about 10 minutes to lock onto the satalites but once it did it was fine.
|
MyBlackJack2.com Forum Moderator
|
|
|
1:00 am
August 28, 2008
|
flatoutfab
Member
| | | |
| posts 3 |
|
|
pukka said:
Ultimatix, You can always try and install the new Software update from garmin (click here), this is the newest garmin software however with this update you still have to follow the same procedures listed in this guide by just replacing the Garmin Installer with this newer one. It may just fix your problem as it will use the Intermediate drivers for the gps instead of COM4.
Give this a try and let me know how it works.
Also make sure you have Modaco GPS hack installed correctly.
this worked for me!!!!!!!!! awesome. i should of known i needed a software update because everytime i installled garmin it would shoot me a compatibility error. only thing is when i am using it i get no sound? i tried adjusting the settings but no luck. still better then not having the software work at all though!
|
|
|
10:16 am
August 28, 2008
|
pukka
Moderator
| | | |
| posts 1275 |
|
|
Flatoutfab, The audio should work make sure your Garmin Voice is enabled and also make sure your profile is set to normal or loud….Then make sure your earpiece volume is also up.
|
MyBlackJack2.com Forum Moderator
|
|
|
7:04 am
August 30, 2008
|
ultimatix
Guest
| | | |
| |
|
|
pukka said:
Ultimatix, You can always try and install the new Software update from garmin (click here), this is the newest garmin software however with this update you still have to follow the same procedures listed in this guide by just replacing the Garmin Installer with this newer one. It may just fix your problem as it will use the Intermediate drivers for the gps instead of COM4.
Give this a try and let me know how it works.
Also make sure you have Modaco GPS hack installed correctly.
Awesome. It took 2 mins to download and update. Started the Garmin XT.. it took 2 mins to lockup GPS satellite signal. Voice guidance also works great. Thank you very much Pukka.
|
|
|
3:44 am
August 31, 2008
|
virgo0824
Guest
| | | |
| |
|
|
Thank you SO MUCH! I have been trying to get this to work for 2 days! Installed the update and it was working no problem in less than 5 minutes. You guys ROCK!
|
|
|
11:45 am
August 31, 2008
|
Anh
Guest
| | | |
| |
|
|
Hi Pukka,
Thanks a lot for ur great jobs, I installed every thing correctly but when I go to “where to” and input an address I want to go to, it said ” download traffic information required to access Garmin server online, do u allowed it ? “ I clicked on ” yes” then it said ” the server denied access to this serivce, please visit my.garmin.com to purchase or enable service” if I choose ok it said” Awating better GPS accuracy”
COuld you please help me to solve this problem ?
Thanks
P/S: I could not see my location by GPS as well
|
|
|
11:54 am
August 31, 2008
|
redbone1205
Member
| | | |
| posts 1 |
|
|
Hi All, This think this sire is the best thing since sliced bread !! I need some help I am tried to muddle my way throught this mod, but it's not going too good. I'm stuck on the MapSource. I dowlaned Vuze on my pc. Now what? Should I be searching for map source on Vuze, and if so which one should I download? And should I download it too my phone or the PC.
Ok I know someone is laughing at me 
|
|
|
1:02 pm
August 31, 2008
|
b_bohnert_00
Member
| | | |
| posts 4 |
|
|
Does Using Gps system like garmin. Do you need a internet conection?
|
|
|
4:47 pm
August 31, 2008
|
pukka
Moderator
| | | |
| posts 1275 |
|
|
Redbone, read the instructions again, you must now download the torrent and then further proceed the install guide
B_bohnert_00, no you do not need an Internet Connection, Please read the Install guide thoroughly I too do Not have an Data plan.
|
MyBlackJack2.com Forum Moderator
|
|
|
10:29 pm
September 3, 2008
|
Clyde
Guest
| | | |
| |
|
|
hello pukka i've just updated to Winmobile 6.1 on my BJ2 and i was so happy to find ur tutorial. It works! thanks alot!!!
|
|
|
3:55 am
September 4, 2008
|
weiwei2
Guest
| | | |
| |
|
|
i was reading on the modaco hack page http://www.myblackjack2.com/hacks-and-mods/application-unlockers/modaco-gps-hack/ and read about this
ccc Says:
i have read the same story in other forums of blackjack 2.
i'm going to try upgrade my blackjack 2 to windows mobile 6.1 tomorrow. and after that try install garmin mobile xt without modaco hack. will share whether it works later.
if it doesn't work, i'll try apply the modaco hack.
|
|
|
3:59 am
September 4, 2008
|
weiwei2
Guest
| | | |
| |
|
|
i've just realized in another posting that says app unlock is not necessary for windows mobile 6.1. pls ignore my previous posting.
|
|
|
10:51 am
September 5, 2008
|
geokido
Member
| | | |
| posts 7 |
|
|
I had previously installed Garmin Mobile XT on my BJ2 and it was working fine. I then upgraded to WM6.1 and reinstalled Garmin, but it searched for a bluetooth connection. I only had com 1, 2, 3, and 9 available, so I tried Microsoft GPSID to enable com 4. Since I did that, Garmin won't load at all and I get an error saying “there was a problem with QueSp.exe.” So I tried changing what I did in Microsoft GPSID, but the problem remains. Then I tried removing the GPSID program, and it says it won't uninstall completely. Ugh. I'm going to try updating my Garmin software when I get home to see if that fixes things. Anybody else have this problem? Any ideas for other remedies?
|
|
|
|
|
on WM 6.1 you don't need a GPS hack. Just update the Garmin software. Then if it still searches for bluetooth just manually change it to the GPS Intermediate Device (second choice).
If that still doesn't work you might just have to reinstall it on the phone. You won't have to redo the SD card.
Go to remove program.
Unistall Garmin Mobile XT.
Remove SD card.
Reinsert SD card.
It will ask you if you want to install Garmin.
Of course say yes and let it install.
If it still searches for devices just manually change it to the GPS Intermediate Device. And it should work.
|
|
|
4:12 pm
September 5, 2008
|
geokido
Member
| | | |
| posts 7 |
|
|
I updated Garmin on my phone, which prompted a reinstall. After it was done, it tried to run… but it doesn't get past the splash screen. I see the Garmin logo and some and copyright info for a couple of seconds, then it goes back to my start menu. After about another 20 seconds, I get a message saying:
“Data type misalignment at Program address 0×03FA4F5C in background thread NULL (Main InitInstance)”
So now I can't even get Garmin to run at all. I think it has to be the Microsoft GPSID causing the problem, but it won't uninstall. I'll probably have to refresh factory settings to get rid of it, since reboots and retries don't help. I only used it because the only options I had for GPS were bluetooth, com 1, com 2, com 3, and com 9.
|
|
|
4:53 pm
September 5, 2008
|
geokido
Member
| | | |
| posts 7 |
|
|
Sorry for the double-post, but I just wanted to report my results. I did a hard reset (which kept 6.1 installed but deleted all photos & such), reinstalled the updated version of Garmin, and it finally ran. After a few seconds of the scroll-type looking thing with a magnifying glass, I got 3 green bars inside my house! Up and running with no other steps needed.
|
|
|
1:52 pm
September 7, 2008
|
avenger48
Member
| | | |
| posts 45 |
|
|
I finally got it asking if it wanted me to install it (Thanks, Pukka), but now I have a new problem. When I insert the card, it asks if I want to install, I press yes, and it says,
“There was an error installing Garmin Mobile XT files. Please make sure no other programs are running, and that there is enough storage in your device's main memory.”
No other programs are running, according to task manager. Anyone know how much memory it takes?
EDIT: There is something wrong with my Garmin. I tried installing after a full reset, and it didn't work. So I have enough memory and no programs running. Great.
|
|
|
4:34 pm
September 7, 2008
|
pukka
Moderator
| | | |
| posts 1275 |
|
|
avenger, best bet is to delete Garmin off your memory carc ompletly, start fresh
|
MyBlackJack2.com Forum Moderator
|
|
|
5:40 pm
September 7, 2008
|
avenger48
Member
| | | |
| posts 45 |
|
|
Did that. Which Com port do you use. Mine was preset as bluetooth, and has options of coms 1-3 and 9. I'm using 1, but I don't think it's working.
I hadn't installed maps yet, though, so I'll try that first. The problem was it gave me a very broad map of US and showed me as being in central Kansas (I'm in FL)
EDIT: no help. It keeps searching for the GPS device. I wonder if mine is weird and still needs MoDaCo? It can't hurt.
|
|
|
2:45 am
September 8, 2008
|
Bebopbam
Member
| | | |
| posts 1 |
|
|
Login
Register
Search 
Add a New Topic
Reply to Post
34567 8
910111213
25
Quote and Reply
Topic RSS 
hi
i actually found that in my bjII, the installation of modaco, gmap and garmin xt screwed up my gps. i have to do a master reset to clean it up. after the reset i simply install the garmin xt and it works right away!! therefore, i am convinced that the modaco hack is not necessary to unlock the gps. actually, the gps was probably never locked in the first place.